型號 Model

P-IS200

額定負載  Specified load

10 kg（含夾具、試驗件）fixtures, test pieces are included

臺面尺寸（長×寬）

Bench Dimension

200×200 mm

沖擊波形Pulse Wave：

半正弦波Half sinusoidal wave

峰值加速度(半正弦波)

Shock Impact Peak Acceleration

150～15000 m/s2 

脈沖持續時間(半正弦波)

Pulse Duration Time：

0.6～20ms

外形尺寸（長×寬×高）

External Dimension

1000mm×500mm×2700mm

設備重量 Weight

1500 kg

沖擊形式Impact form

自由跌落Free fall

*大跌落高度Max. drop height

1500mm

電    源 Power Supply

三相380V，50/60 Hz  Three phase 380V，50/60 Hz

液壓源Hydraulic source

隨機配置 With the equipment

環境條件

溫度（℃）Temperature

0～40

Condition

濕度（25℃）Humidity

＜85％

可靠性

reliability

平均無故障積累工作時間≥1000h；

Average failure-free accumulation working time ≥ 1000h;

半正弦波形發生器連續沖擊次數不小于5000次；

The half-sine waveform generator has no less than 5000 consecutive impacts;

半正弦波形發生器的在干凈、常溫環境下的存儲時間不小于5年。

The half-sine waveform generators have a storage time of no less than 5 years in a clean, room temperature environment.

測控系統

Testing system

ShockDAQ沖擊、碰撞測量控制系統

Impact, collision measurement control system

適用標準

Usage standard

GJB150、GJB360、GJB548、GB/T2423、GJB1217、JJG497、GIEC68-2-27

檢定標準

Testing standard

加速度幅值、脈寬、均勻度和橫向運動比滿足JJG541-88的要求。

Acceleration amplitude, pulse width, uniformity, and lateral motion ratio meet the requirements of JJG541-88.