電池安全性檢測設備 -> 電池針刺試驗機
電池安全性檢測設備 -> 電池針刺試驗機
試驗應在20℃的環境溫度下進行，將接有熱電偶的電池（熱電偶的觸點固定在電池大表面上）置于通風櫥中，用直徑2~8mm的無蝕銹鋼針以10mm/s~40mm/s的速度 刺穿電池最大表面的中心位置，并保持任意時間。
The test should be carride out in the environment at 20℃. Put the battery connected to thermocouple (with contacts fixed to th large surface of the battery) in the hood, penetrate the of the largest surface of the battery with 2~8mm diameter stainless steel needle at 10~40mm/s speed, and maintain any time.
符合標準
-
GB/T 31241
-
GB/T 31486-2015
-
GB/T 31485-2015
-
GB/T 31484-2015
-
GB/T 31467.1-2015
-
GB/T 31467.2-2015
-
GB/T 31467.3-2015
-
QC/T 741-2014等
技術參數 Technical parameter(ψ2mm~ψ8mm的耐高溫鋼針，長度可根據客戶要求定制)
|
設備型號 Equipment
|
測試空間 Test space(mm)
|
|
型號 Mode
|
HBT-ZC-1
|
|
針尖距離下部距離
|
放電池的平面200m Plane for the battery is 200mm
|
|
可夾距離
|
200mm
|
|
針刺速度
|
以10~40mm/s的速度，從垂直于蓄電池極板的方向貫穿（鋼針停留在蓄電池中） Penetrate in the direction perpendicular to the battery plate at 10~40mm/s speed (needle stays in the battery)
|
|
最大貫穿力 Maximum penetration force
|
200kg
|
|
力量顯示 strength display
|
壓力傳感LED顯示 Pressure sensor LED display
|
|
行程 Stroke
|
200mm
|
|
驅動方式 Drive
|
氣缸驅動 Cylinder dirve
|
|
夾持方式
|
手動夾持或撥動夾持 Manual or pneumatic clamping
|
|
箱體結構 Box structure
|
做成箱式設備裝置防爆、防火、抗腐蝕、易清理 Made into box-type equipment, explosion-proof, fireproof, corrosion-resistant, easy to clean.
|
|
防爆箱材質 Material of explosion-proofbox
|
鍍鋅板烤漆處理 Galvanized plate baking varnish processing
|
|
重量 Weight
|
約(about) 75kg
|
|
電源要求
|
1ψ 220V/50Hz
|
